If you are already logged in, Skip A. Login and Go To B. Pre-trip Inspection -

A. Login

1. Using the keyboard, enter your J.B. Hunt Alpha Code as Driver ID - Hit Tab on your Keyboard or Tap the Password Field on the Screen

2. Your Password will be the same as what you use to log into Web Based Training. (Hint: JB+Last 4 of SSN)- Type PW then Hit Enter on Keyboard – Unit will place a call to retrieve logs

3. Select your Duty status.

4. Certify if all previous logs are true and correct: IF you have not been able to review your previous days logs, select NO. Selecting YES will Certify ALL previous log entries & you will no longer be able to make changes/annotations.

5. At Login- Confirmation, before selecting OK, be sure to add your Mani- fest and Trailing Info by selecting Load Icon Note: Use The Action Bar at Bottom Of the Screen for Easy Access to related screens

B. Flagging Inspections – Required before you start your first driving period of each day and any time you change equipment. You must be *On Duty first*

1. Tap eDriver Logs > Duty Status > Inspection - Then select New Inspection

2. Select the Pre, Inter, Post or DOT icon and enter the required information. Tap Done.

IMPORTANT! You will still need to complete a DVIR per 396.11. Use Form 45 – Electronic Vehicle Inspection

A. Review Hours of Service

1. From the Home screen - Tap eDriver Logs

2. Tap View HOS icon, This Summary section displays available driving, on duty, and cycle time per regulation.

3. Use the action bar to view your 1 Day or 8 Day graphs or the detail of all duty status events

4. Use the arrow button on the action bar to look at previous days logs.

B. Changes to Duty Status

Blu.2 will automatically record Driving and On Duty Status. You can manually change your status to Off Duty, Sleeper or On Duty. If you forget to enter a status or need to correct an existing one, you can make changes or Annotations to your log. However, you will not be able to change a Drive Line that was automatically written.

B1. Auto Duty Status

1. Driving Time - Automatically written to your log Once you have driven 2.0 miles, the device will automatically move you to the drive line.

2. On Duty Time – Automatically written to your log. Once you have stopped for 5 minutes, the device will display the following message:

"Tap OK to confirm the duty status change to On Duty" –OR- IF you do nothing, Message will close and you will still be placed On Duty

B2. Manual Duty Status- Changing to On Duty & Flagging Comments.

1. From the Home screen–Tap eDriver Logs icon

2. Tap Duty Status icon

3. Change To Line 4 by choosing from the following options:

• On Duty
• Load,
• Unload
• Fuel
• Inspection
• Other

4. Location information should auto-populate – Tap OK

5. Review & Confirm your Duty Status – Tap OK

B3. Make a Log Annotation

1. Tap eDriver Logs icon

2. Tap Annotation

3. Choose Existing DS or Forgotten DS Icon

1. Select which existing Duty Status event you need to change.

2. Select OK.

3. Select the Duty Status icon for what you want to change TO.

4. Enter required remark, Tap OK.

5. Review change and confirm YES/NO.

1. Select the Duty Status for the status line you are changing TO.

2. Select Next

3. Change the Date & Time

4. Enter Location and remark of the reason for change (required)

5. Select OK